Publication Beamlines Strategic Pillar
Izadifar, Mohammad; Babyn, Paul; Kelly, Michael E.; Chapman, Dean; Chen, Xiongbiao et al. (2017). Bioprinting Pattern-Dependent Electrical/Mechanical Behavior of Cardiac Alginate Implants: Characterization and Ex Vivo Phase-Contrast Microtomography Assessment. Tissue Engineering - Part C: Methods 23(9) , 548-564. 10.1089/ten.tec.2017.0222. BMIT-BM Materials
Izadifar; Mohammad (2016). DEVELOPMENT OF NANOPARTICLE RATE-MODULATING AND SYNCHROTRON PHASE CONTRAST-BASED ASSESSMENT TECHNIQUES FOR CARDIAC TISSUE ENGINEERING. Supervisor: Chen, Daniel; Kelly, Michael E.. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/7485. BMIT-BM Materials
Iyer, Ganjigunte R. Swathi; Wang, Jian; Wells, Garth; Guruvenket, Srinivasan; Payne, Scott et al. (2014). Large-Area, Freestanding, Single-Layer Graphene–Gold: A Hybrid Plasmonic Nanostructure. ACS Nano 8(6) , 6353-6362. 10.1021/nn501864h. MID-IR, SM, SYLMAND Materials
Iyer, Ganjigunte R. Swathi; Wang, Jian; Wells, Garth; Guruvenket, Srinivasan; Payne, Scott et al. (2014). Large-Area, Freestanding, Single-Layer Graphene–Gold: A Hybrid Plasmonic Nanostructure. ACS Nano 8(6) , 6353-6362. 10.1021/nn501864h. MID-IR, SM, SYLMAND Materials
Iyer, Ganjigunte R. Swathi; Wang, Jian; Wells, Garth; Guruvenket, Srinivasan; Payne, Scott et al. (2014). Large-Area, Freestanding, Single-Layer Graphene–Gold: A Hybrid Plasmonic Nanostructure. ACS Nano 8(6) , 6353-6362. 10.1021/nn501864h. MID-IR, SM, SYLMAND Materials
Iyer, Ganjigunte R. S.; Wang, Jian; Wells, Garth; Bradley, Michael P.; Borondics, Ferenc et al. (2015). Nanoscale imaging of freestanding nitrogen doped single layer graphene. Nanoscale 7(6) , 2289-2294. 10.1039/c4nr05385k. SM, SYLMAND Materials
Iyer, Ganjigunte R. S.; Wang, Jian; Wells, Garth; Bradley, Michael P.; Borondics, Ferenc et al. (2015). Nanoscale imaging of freestanding nitrogen doped single layer graphene. Nanoscale 7(6) , 2289-2294. 10.1039/c4nr05385k. SM, SYLMAND Materials
Ismail, Fatma; Alnoush, Wajdi; Abdellah, Ahmed; Tan, Shunquan; Salem, Kholoud E. et al. (2025). Boosting Electrochemical Conversion of CO2 to CO in a Membrane Electrode Assembly Using Nickel–Nitrogen/Carbon Supported Nickel–Zinc Carbide Particle Catalyst. ACS Electrochemistry 1(7) , 1141-1153. 10.1021/acselectrochem.5c00006. HXMA Materials
Ismail, Fatma; Abdellah, Ahmed; Sudheeshkumar, V.; Rakhsha, Amirhossein; Chen, Weifeng et al. (2022). Atomically Isolated Nickel–Nitrogen–Carbon Electrocatalysts Derived by the Utilization of Mg2+ ions as Spacers in Bimetallic Ni/Mg–Metal–Organic Framework Precursors for Boosting the Electroreduction of CO2. ACS Applied Energy Materials 5(8) . 10.1021/acsaem.2c00944. HXMA Materials
Islam, Taohedul; Li, Mengya; Blanton, Alicia; Pitton, Kathryn A.; Rao, Keerthan R. et al. (2023). Chalcocarbogels as High-Capacity and Cycle-Stable Electrode Materials for Lithium and Sodium Ion Batteries. ACS Energy Letters , 1-9. 10.1021/acsenergylett.3c02112. VESPERS Materials
Islam, Taohedul; Chandra Roy, Subrata; Bayat, Sahar; Adigo Weret, Misganaw; Hoffman, Justin M. et al. (2024). Mo3S13 Chalcogel: A High‐Capacity Electrode for Conversion‐Based Li‐Ion Batteries. ChemSusChem 17(11) . 10.1002/cssc.202400084. VESPERS Materials
Islam, Taohedul; Bayat, Sahar; Wright, Matthew A.; Roy, Subrata Chandra; Sawicki, Conrad et al. (2025). Porous and Amorphous MnxMo3S13 Chalcogel Electrode for High-Capacity Conversion-Based Lithium-Ion Batteries. Journal of the American Chemical Society 147(9) , 7400-7410. 10.1021/jacs.4c15552. VESPERS Materials
Islam, Taohedul; Bayat, Sahar; Pitton, Kathryn; Wright, Matthew A.; Rahman, Muhammad Mominur et al. (2026). Covalently Integrated Amorphous Mn x Mo 3 S 13 –GO Chalcocarbogel for High Capacity and Long‐Life Sulfur Equivalent Conversion Electrodes. Small . 10.1002/smll.75060. VESPERS Materials
Islam, MD Armin (2019). OPTIMAL DESIGN OF THE MAGNET PROFILE FOR A COMPACT QUADRUPOLE ON STORAGE RING AT THE CANADIAN SYNCHROTRON FACILITY. Supervisor: Zhang, W.J.; Boland, Mark. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/12499. Materials
Hyungki Shin (2023). Study of 4+ and 3+ titanate oxide thin films grown by molecular beam epitaxy. Supervisor: Zou, Ke. British Columbia, Canada: University of British Columbia. http://hdl.handle.net/2429/83861. REIXS Materials