| Balakrishnan; Manojkumar (2019). Tailored Electrospun Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells: Design and Durability. Supervisor: Bazylak, Aimy. Ontario, Canada: University of Toronto. http://hdl.handle.net/1807/97839. |
BMIT-BM |
Masters Thesis |
Materials |
| Andrew Wong (2018). Designing microporous layers for polymer electrolyte membrane fuel cells: pore network modelling and fabrication. Supervisor: Bazylak, Aimy. Ontario, Canada: University of Toronto. https://tspace.library.utoronto.ca/handle/1807/91681. |
BMIT-BM |
Masters Thesis |
Materials |
| Alagarsamy; Nagarajan (2007). Mechanical support design of analyzer for a diffraction enhanced x-ray imaging (DEI) system. Supervisor: Szyszkowski, Walerian; Chapman, L. Dean. Saskatchewan, Canada: University of Saskatchewan. https://ecommons.usask.ca/handle/10388/etd-05172007-160800. |
BMIT-BM |
Masters Thesis |
Materials |
| Abdullah Chisti (2013). Texture Analysis of Diffraction Enhanced Synchrotron Images of Trabecular Bone at the Wrist. Supervisor: Eramian, Mark; Cooper, David. Saskatchewan, Canada: University of Saskatchewan. https://ecommons.usask.ca/handle/10388/ETD-2013-08-1194. |
BMIT-BM |
Masters Thesis |
Materials |
| Tristan K. Kuehn (2020). A 3D Printed Axon-Mimetic Diffusion MRI Phantom. Supervisor: Khan, Ali R. Ontario, Canada: The University of Western Ontario. https://ir.lib.uwo.ca/etd/7238/. |
BMIT-ID |
Masters Thesis |
Materials |
| Popoola, Aminat Adeola (2009). A Fiducial Subject Pre-alignment System for the Biomedical Imaging and Therapy Beamline at the Canadian Light Source.. Supervisor: Chapman, L. Dean; Adams, Gregg P.. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/etd-04142009-181529. |
BMIT-BM, BMIT-ID |
Masters Thesis |
Materials |
| Lo, Calvin (2020). Characterization of the Microstructure and Mechanical Behavior of Intact and Damaged Alumina. Supervisor: Hogan, James D.. Alberta, Canada: University of Alberta. https://doi.org/10.7939/r3-jx75-nk89. |
BMIT-ID |
Masters Thesis |
Materials |
| Keith; Jay D. (2017). Realization of a Canine Positioning Device for in Situ Prostate Phase Contrast - Computed Tomography Imaging. Supervisor: Pettitt, Murray; Snead, Elisabeth. Saskatchewan, Canada: University of Saskatchewan. https://ecommons.usask.ca/handle/10388/7846. |
BMIT-BM, BMIT-ID |
Masters Thesis |
Materials |
| Dina, Gabriel (2011). Laue monochromator performance calculations for a future Canadian light source diffraction beamline. Supervisor: Kycia, S. W.. Ontario, Canada: University of Guelph. http://hdl.handle.net/10214/3101. |
BXDS-WHE, BXDS-WLE |
Masters Thesis |
Materials |
| Dina, Gabriel (2011). Laue monochromator performance calculations for a future Canadian light source diffraction beamline. Supervisor: Kycia, S. W.. Ontario, Canada: University of Guelph. http://hdl.handle.net/10214/3101. |
BXDS-WHE, BXDS-WLE |
Masters Thesis |
Materials |
| Vaishnavi Raja (2020). Fabricating Cu2ZnSnS4, Cu2ZnSn(S,Se)4 and CuIn(S,Se)2 light- absorbing thin films for low-cost solar devices.absorbing thin films for low-cost solar devices. Supervisor: Ding, Zhifeng. Canada: The University of Western Ontario. https://ir.lib.uwo.ca/etd/7505. |
CLS-APS, VLS-PGM |
Masters Thesis |
Materials |
| Sifat, Rahin (2018). The effect of chemical substitution on the local structure of garnet-type oxides that have nuclear waste sequestration applications. Supervisor: Grosvenor, Andrew. Saskatchewan, Canada: University of Saskatchewan. https://harvest.usask.ca/bitstream/handle/10388/11278/SIFAT-THESIS-2018.pdf?sequence=1. |
CLS-APS |
Masters Thesis |
Materials |
| Shepit, Michael Melvin Joseph (2020). Using antiferromagnetic Co3O4 shapes and ferrimagnetic CuxCo3-xO4 to quantify broken and modified exchange interactions at the surface and core of nanoparticles. Supervisor: van Lierop, Johan. Manitoba, Canada: University of Manitoba. http://hdl.handle.net/1993/34972. |
CLS-APS |
Masters Thesis |
Materials |
| Pritam Saha (2017). "Monitoring the dissolution of sparingly soluble oxide minerals at extreme temperatures and pressures using the hydrothermal diamond anvil cell”. Supervisor: Alan Anderson. Nova Scotia, Canada: St. Francis Xavier University. . |
CLS-APS |
Masters Thesis |
Materials |
| Pritam Saha (2017). Monitoring the dissolution of sparingly soluble oxide minerals at extreme temperatures and pressures using the hydrothermal diamond anvil cell. Supervisor: Anderson, Alan. Nova Scotia, Canada: St. Francis Xavier University. . |
CLS-APS |
Masters Thesis |
Materials |