Publication Beamlines Strategic Pillar
Yunfei Jiang (2017). Effect of heat stress on pollen development and seed set in field pea (Pisum sativum L.). Supervisor: Bueckert, Rosalind; Davis, Arthur. Saskatoon, SK, Canada: University of Saskatchewan. https://ecommons.usask.ca/handle/10388/7725. BMIT-BM Agriculture
Deman, P.; Tan, S.; Belev, G.; Samadi, N.; Martinson, M. et al. (2017). Respiratory-gated KES imaging of a rat model of acute lung injury at the Canadian Light Source. Journal of Synchrotron Radiation 24(3) , 679-685. 10.1107/s160057751700193x. BMIT-BM Health
Martinson; Mercedes (2017). Bent Laue X-ray Beam Expander. Supervisor: Chapman, Dean; Babyn, Paul. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/7739. BMIT-BM Materials
Liu, Hang; George, Michael G.; Banerjee, Rupak; Ge, Nan; Lee, Jongmin et al. (2017). Accelerated Degradation of Polymer Electrolyte Membrane Fuel Cell Gas Diffusion Layers. Journal of the Electrochemical Society 164(7) , F704-F713. 10.1149/2.0081707jes. BMIT-BM Materials
Lee, J.; Banerjee, R.; George, M. G.; Muirhead, D.; Shrestha, P. et al. (2017). Multiwall Carbon Nanotube-Based Microporous Layers for Polymer Electrolyte Membrane Fuel Cells. Journal of the Electrochemical Society 164(12) , F1149-F1157. 10.1149/2.0861712jes. BMIT-BM Materials
Izadifar; Zahra (2017). VISUALIZATION OF ULTRASOUND INDUCED CAVITATION BUBBLES USING SYNCHROTRON ANALYZER BASED IMAGING. Supervisor: Chapman, Dean; Babyn, Paul. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/7667. BMIT-BM Materials
George, Michael G.; Liu, Hang; Muirhead, Daniel; Banerjee, Rupak; Ge, Nan et al. (2017). Accelerated Degradation of Polymer Electrolyte Membrane Fuel Cell Gas Diffusion Layers. Journal of the Electrochemical Society 164(7) , F714-F721. 10.1149/2.0091707jes. BMIT-BM Materials
Ge, Nan; George, Michael G.; Lee, Jongmin; Muirhead, Daniel; Chevalier, Stéphane et al. (2017). Considering Photon Scattering and Harmonics for Synchrotron X-ray Radiographic Imaging of Polymer Electrolyte Membrane Fuel Cells. Journal of the Electrochemical Society 164(11) , E3215-E3224. 10.1149/2.0231711jes. BMIT-BM Materials
Bawolin, N. K.; Chen, X. B. (2017). Remote Determination of Time-Dependent Stiffness of Surface-Degrading-Polymer Scaffolds Via Synchrotron-Based Imaging. Journal of Biomechanical Engineering 139(4) , 0410041-8. 10.1115/1.4036021. BMIT-BM Materials
Banerjee, Rupak; Ge, Nan; Lee, Jongmin; George, Michael G.; Chevalier, Stéphane et al. (2017). Transient Liquid Water Distributions in Polymer Electrolyte Membrane Fuel Cell Gas Diffusion Layers Observed through In-Operando Synchrotron X-ray Radiography. Journal of the Electrochemical Society 164(2) , F154-F162. 10.1149/2.0991702jes. BMIT-BM Materials
Pratt, Isaac Vorster; Cooper, David Michael Lane (2017). A method for measuring the three-dimensional orientation of cortical canals with implications for comparative analysis of bone microstructure in vertebrates. Micron 92, 32-38. 10.1016/j.micron.2016.10.006. BMIT-ID Health
Olubamiji, Adeola D.; Zhu, Ning; Chang, Tuanjie; Nwankwo, Chijioke K.; Izadifar, Zohreh et al. (2017). Traditional Invasive and Synchrotron-Based Noninvasive Assessments of Three-Dimensional-Printed Hybrid Cartilage Constructs In Situ. Tissue Engineering - Part C: Methods 23(3) , 156-168. 10.1089/ten.tec.2016.0368. BMIT-ID Health
Olubamiji; Adeola Deborah (2017). Development of 3D-Printed Cartilage Constructs and Their Non-Invasive Assessment by Synchrotron-Based Inline-Phase Contrast Imaging Computed Tomography. Supervisor: Chen, Daniel; Eames, Brian. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/7670. BMIT-ID Materials
Dydula; Christopher; Belev; George; Johns et al. (2017). Accelerated x-ray scatter projection imaging using multiple continuously moving pencil beams. In Progress in Biomedical Optics and Imaging - Proceedings of SPIE. . , 101324J 10.1117/12.2253720. BMIT-ID Materials
Liu, Peng; Ptacek, Carol J.; Blowes, David W.; Finfrock, Y. Zou; Gordon, Robert A. et al. (2017). Stabilization of mercury in sediment by using biochars under reducing conditions. Journal of Hazardous Materials 325, 120-128. 10.1016/j.jhazmat.2016.11.033. CLS-APS Environment