Publication Beamlines Strategic Pillar
Bassey, B.; Samadi, N.; Panahifar, A.; Cooper, D.M.L.; Chapman, D. et al. (2018). Crossover artifact in X-ray focusing imaging systems: K-edge subtraction imaging. Nuclear Instruments and Methods in Physics Research. Section A: Accelerators. Spectrometers. Detectors and Associated Equipment 910, 26-34. 10.1016/j.nima.2018.08.072. BMIT-BM Materials
Nahshon Bawolin (2016). MODELLING AND IN VIVO MONITORING OF THE TIME DEPENDENT MECHANICAL PROPERTIES OF TISSUE ENGINEERING SCAFFOLDS. Supervisor: Chen, Daniel; Zhang, Chris. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/ETD-2015-11-2488. BMIT-BM Materials
Izadifar; Mohammad (2016). DEVELOPMENT OF NANOPARTICLE RATE-MODULATING AND SYNCHROTRON PHASE CONTRAST-BASED ASSESSMENT TECHNIQUES FOR CARDIAC TISSUE ENGINEERING. Supervisor: Chen, Daniel; Kelly, Michael E.. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/7485. BMIT-BM Materials
Izadifar; Zahra (2017). VISUALIZATION OF ULTRASOUND INDUCED CAVITATION BUBBLES USING SYNCHROTRON ANALYZER BASED IMAGING. Supervisor: Chapman, Dean; Babyn, Paul. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/7667. BMIT-BM Materials
Martinson; Mercedes (2017). Bent Laue X-ray Beam Expander. Supervisor: Chapman, Dean; Babyn, Paul. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/7739. BMIT-BM Materials
Shrestha; Pranay (2018). Custom Microporous Layers for Polymer Electrolyte Membrane Fuel Cells. Supervisor: Bazylak, Aimy. Ontario, Canada: University of Toronto. http://hdl.handle.net/1807/89510. BMIT-BM Materials
George; Michael Gerald (2016). X-ray-based Imaging for Characterizing Heterogeneous Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells. Supervisor: Bazylak, Aimy. Ontario, Canada: University of Toronto. http://hdl.handle.net/1807/74837. BMIT-BM Materials
Banerjee, R.; Chevalier, S.; Liu, H.; Lee, J.; Yip, R. et al. (2017). A Comparison of Felt-Type and Paper-Type Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cell Applications Using X-Ray Techniques. Journal of Electrochemical Energy Conversion and Storage 15(1) , 011002. 10.1115/1.4037766. BMIT-BM Materials
Lee; Jongmin (2017). X-ray Investigations of Liquid Water Transport in Polymer Electrolyte Membrane Fuel Cell Gas Diffusion Layers. Supervisor: Bazylak, Aimy. Ontario, Canada: University of Toronto. http://hdl.handle.net/1807/80981. BMIT-BM Materials
Banerjee; Rupak; Han; Chuzhang; Ge et al. (2017). Synchrotron X-Ray Investigation of Membrane Water Distribution in Polymer Electrolyte Membrane Fuel Cell Applications. In ASME 2017 15th International Conference on Nanochannels, Microchannels, and Minichannels. . 10.1115/icnmm2017-5556. BMIT-BM Materials
Muirhead, Daniel; Banerjee, Rupak; George, Michael G.; Ge, Nan; Shrestha, Pranay et al. (2018). Liquid water saturation and oxygen transport resistance in polymer electrolyte membrane fuel cell gas diffusion layers. Electrochimica Acta 274, 250-265. 10.1016/j.electacta.2018.04.050. BMIT-BM Materials
Bassey; Bassey (2018). DEVELOPMENT OF A MULTIPLE ENERGY SYNCHROTRON BIOMEDICAL IMAGING SYSTEM. Supervisor: Chapman, Dean. saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/8336. BMIT-BM Materials
Izadifar; Zohreh (2016). DEVELOPMENT OF HYBRID-CONSTRUCT BIOPRINTING AND SYNCHROTRON-BASED NON-INVASIVE ASSESSMENT TECHNIQUES FOR CARTILAGE TISSUE ENGINEERING. Supervisor: Chen, Daniel; Chapman, Dean. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/ETD-2015-12-2355. BMIT-BM Materials
Keith; Jay D. (2017). Realization of a Canine Positioning Device for in Situ Prostate Phase Contrast - Computed Tomography Imaging. Supervisor: Pettitt, Murray; Snead, Elisabeth. Saskatchewan, Canada: University of Saskatchewan. https://ecommons.usask.ca/handle/10388/7846. BMIT-BM, BMIT-ID Materials
Rahman, KM Mostafijur; Szpunar, Jerzy; Toroghinejad, Mohammad Reza; Belev, George (2018). Characterization of aluminum/alumina/TiC hybrid composites in 3D produced by anodizing and accumulating roll bonding process using synchrotron radiation tomography. Journal of Composite Materials 53(9) , 1215-1227. 10.1177/0021998318796177. BMIT-BM Materials