Publication Beamlines Strategic Pillar
Bolibruch; N.I.; Vogt; J.M.; Igarashi et al. (2011). Photodiode Calibration using an Electrical Substitution Radiometer in the Hard X-Ray Region. In Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators. Joint Accelerator Conferences Website (JACoW). , 500-502 https://accelconf.web.cern.ch/accelconf/DIPAC2011/papers/tupd83.pdf. BMIT-BM, HXMA Materials
Smith, S.; Shu, D.; Bergstrom, J.; Jiang, D. T. (2007). Front End X-Ray Beam Position Monitors at the CLS. AIP Conference Proceedings , 1002-1005. 10.1063/1.2436231. CMCF-ID, HXMA Materials
Kelly, Joel Alexander (2012). Surface modification of group 14 nanocrystals. Supervisor: Veinot, Jonathan. Alberta, Canada: University of Alberta. https://doi.org/10.7939/R3WP9TF9B. SGM, VLS-PGM Materials
Brian E. Bewer (2010). Development of an X-ray prism for a combined diffraction enhanced imaging and fluorescence imaging system. Supervisor: Chapman, Dean. Saskatchewan, Canada: University of Saskatchewan. https://ecommons.usask.ca/handle/10388/etd-10212010-105154. BMIT-BM, SYLMAND Materials
Tersigni, Andrew (2012). Structural Characterization of Tetracene Films by Lateral Force Microscopy and Grazing-Incidence X-Ray Diffraction. Supervisor: Qin, Xiaorong. ON, Canada: University of Guelph. http://dspace.lib.uoguelph.ca:8080/xmlui/handle/10214/3496?show=full. CLS-APS, HXMA Materials
Mihir Patel (2011). Fundamental understanding of soot induced wear mechanism of diesel engine . Supervisor: Aswath, Pranesh B.. Arlington, TX USA: University of Texas at Arlington. http://search.proquest.com.ezproxy.uta.edu/pqdtglobal/docview/927943294/5C862BD79AC7444BPQ/2?accountid=7117. SGM, SXRMB, VLS-PGM Materials
Blanchard, P.E.R. (2011). Examining the Electronic Structure of Metal Pnictides via X-ray Spectroscopy. Supervisor: Cavell, Ronald; Mar; Arthur. Canada, AB: University of Alberta. https://doi.org/10.7939/R3XQ6R. CLS-APS, HXMA, SGM, SXRMB, VESPERS, VLS-PGM Materials
Zhu; Ying (2012). Bent laue crystals in biomedical x-ray imaging application. Supervisor: Chapman, Dean L.; Nichol, Helen. Saskatchewan, Canada: University of Saskatchewan. https://ecommons.usask.ca/handle/10388/ETD-2012-11-768. BMIT-BM, HXMA Materials
Dina, Gabriel (2011). Laue monochromator performance calculations for a future Canadian light source diffraction beamline. Supervisor: Kycia, S. W.. Ontario, Canada: University of Guelph. http://hdl.handle.net/10214/3101. BXDS-WHE, BXDS-WLE Materials
McDermott, Eamon (2012). Study of Solid State Photocatalysts and other Energy Materials using Synchrotron Radiation. Supervisor: Moewes, Alex. SK, Canada: University of Saskatchewan. http://hdl.handle.net/10388/ETD-2012-09-586. REIXS, SGM Materials
Popoola, Aminat Adeola (2009). A Fiducial Subject Pre-alignment System for the Biomedical Imaging and Therapy Beamline at the Canadian Light Source.. Supervisor: Chapman, L. Dean; Adams, Gregg P.. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/etd-04142009-181529. BMIT-BM, BMIT-ID Materials
Smith, S. (2006). Front End X-ray Beam Position Monitors at the Canadian Light Source. Supervisor: Jiang, De-Tong; Bergstrom, Jack C.. Canada, SK: University of Saskatchewan. http://hdl.handle.net/10388/etd-10032006-135432. CMCF, HXMA Materials
Cormier, Z. (2011). Inducing and Characterizing Structural Changes in RuO2.xH2O. Canada, ON: Dalhousie University. . CLS-APS, SXRMB Materials
May, T.E (2004). Infrared facility at the Canadian light source. Infrared Physics and Technology 45(5-6) , 383-387. 10.1016/j.infrared.2004.01.010. FAR-IR, MID-IR Materials
Wilson, Patrick R.; Khatami, Zahra; Dabkowski, Ryszard; Dunn, Kayne; Chelomentsev, Evgueni et al. (2012). XANES and XEOL Investigation of Cerium and Terbium Co-Doped Silicon Oxide Films. ECS Transactions 45(5) , 43-48. 10.1149/1.3700408. SGM, VLS-PGM Materials