| (2020). Scientific Abstracts and Sessions. Medical Physics 47(6) , E702-E702. 10.1002/mp.14316. |
BMIT-ID |
Conference Proceeding |
Materials |
| Belev, G.; Miller, D.; Samadi, N.; Webb, M. A.; Wysokinski, T. W. et al. (2015). 4 Years of X-ray Imaging at 05B1-1 Beamline at BMIT. IFMBE Proceedings , 162-165. 10.1007/978-3-319-19387-8_39. |
BMIT-BM, BMIT-ID |
Conference Proceeding |
Materials |
| Bree; Michael; Miller; Denise; Kerr et al. (2016). Alignment and position visualization methods for the biomedical imaging and therapy (BMIT) MRT lift. In AIP Conference Proceeding. . , 030023-1 – 030023-4 10.1063/1.4952846. |
BMIT-ID |
Conference Proceeding |
Materials |
| Dydula; Christopher; Belev; George; Johns et al. (2017). Accelerated x-ray scatter projection imaging using multiple continuously moving pencil beams. In Progress in Biomedical Optics and Imaging - Proceedings of SPIE. . , 101324J 10.1117/12.2253720. |
BMIT-ID |
Conference Proceeding |
Materials |
| Linda Lin; Tomasz Wysokinski (2017). CLSI BMIT's Super-Conducting Wiggler Cryogenic Safety Improvements. . http://inspirehep.net/record/1649811/. |
BMIT-ID |
Conference Proceeding |
Materials |
| Luo; Peng; Li; Sheng; Knorr et al. (2018). Underlying Mechanisms of Tight Reservoir Wettability and Its Alteration. In Proceedings - SPE Symposium on Improved Oil Recovery. . , 1-15 10.2118/190214-ms. |
BMIT-ID |
Conference Proceeding |
Materials |
| Miller, C Denise; Wysokinski, Tomasz W; Belev, George; Chapman, L Dean (2013). Human factors design for the BMIT biomedical beamlines. Journal of Physics: Conference Series 425(2) , 022005. 10.1088/1742-6596/425/2/022005. |
BMIT-BM, BMIT-ID |
Conference Proceeding |
Materials |
| Wysokinski; Tomasz W.; Chapman; L. Dean; Miller et al. (2016). 25+2 poles, 4.3 T wiggler at BMIT - 7 years operational experience. In AIP Conference Proceedings. . , 020026-1 – 020026-4 10.1063/1.4952805. |
BMIT-ID |
Conference Proceeding |
Materials |
| Keonhag Lee (2020). Investigating Oxygen and Liquid Water Transport in Porous Transport Layers of Polymer Electrolyte Membrane Electrolyzers. Supervisor: Bazylak, Aimy. Ontario, Canada: University of Toronto. https://tspace.library.utoronto.ca/handle/1807/103292. |
BMIT-ID |
Doctoral Thesis |
Materials |
| Liqun Ning (2018). 3D Bioprinting Tissue Scaffolds with Living Cells for Tissue Engineering Applications. Supervisor: Chen, Daniel. Saskatchewan, Canada: University of Saskatchewan. https://ecommons.usask.ca/handle/10388/8508. |
BMIT-ID |
Doctoral Thesis |
Materials |
| Olubamiji; Adeola Deborah (2017). Development of 3D-Printed Cartilage Constructs and Their Non-Invasive Assessment by Synchrotron-Based Inline-Phase Contrast Imaging Computed Tomography. Supervisor: Chen, Daniel; Eames, Brian. Saskatchewan, Canada: University of Saskatchewan. http://hdl.handle.net/10388/7670. |
BMIT-ID |
Doctoral Thesis |
Materials |
| Keith; Jay D. (2017). Realization of a Canine Positioning Device for in Situ Prostate Phase Contrast - Computed Tomography Imaging. Supervisor: Pettitt, Murray; Snead, Elisabeth. Saskatchewan, Canada: University of Saskatchewan. https://ecommons.usask.ca/handle/10388/7846. |
BMIT-BM, BMIT-ID |
Masters Thesis |
Materials |
| Tristan K. Kuehn (2020). A 3D Printed Axon-Mimetic Diffusion MRI Phantom. Supervisor: Khan, Ali R. Ontario, Canada: The University of Western Ontario. https://ir.lib.uwo.ca/etd/7238/. |
BMIT-ID |
Masters Thesis |
Materials |
| Asai, J.; Hirayama, H. (2011). Dose estimates for an insertion device beamline with a tapered absorber at the Canadian Light Source. Radiation Measurements 46(4) , 418-424. 10.1016/j.radmeas.2011.02.021. |
BMIT-ID |
Peer-Reviewed Article |
Materials |
| Asai, Juhachi; Wysokinski, Tomasz W.; Chapman, Dean; Mullin, Curtis (2011). Radiation shielding study against gas bremsstrahlung for the BMIT POE3 at the Canadian light source. Radiation Physics and Chemistry 80(6) , 716-722. 10.1016/j.radphyschem.2011.02.026. |
BMIT-ID |
Peer-Reviewed Article |
Materials |